Do Appliance Repair Vendors Need a COI?

Should small appliance repair vendors give you a certificate of insurance? How sole proprietors and comp exemptions work, plus minimum practical requirements.

Yes, in most cases a property manager should ask an appliance repair vendor for a certificate of insurance. The practical minimum is general liability, with workers' compensation if the vendor has helpers. A one-person shop may be exempt from comp in some states, which you can handle with a documented exclusion. Confirm with your agent and attorney.

Appliance repair is the vendor category managers are most tempted to skip. A technician in and out of a unit in 40 minutes does not feel like a risk. But the technician is in a resident's home, handling gas and electrical connections and water lines. If you manage 50 to 500 units, you may use five or six small appliance vendors and know none of them well. This guide explains a reasonable minimum. For the full list of vendor requirements, see what insurance property managers should require from vendors and the property manager COI hub.

Why Does a 40-Minute Appliance Repair Need a Certificate?

Because the damage does not scale with the time on site. Three quick examples:

  • A technician replaces a washer hose and mis-seats it. The unit floods overnight and the water reaches the ceiling below.
  • A dryer vent reconnection leaves lint exposed to heat. A fire starts weeks later.
  • A gas range is reconnected and a leak is missed. Even a small incident means serious injury and displaced residents.

In each case a resident or the owner asks who is responsible. A general liability policy in the vendor's name gives you somewhere to send the claim other than the owner's policy. Without a certificate, you do not know if that policy exists. Our explainer on certificates of insurance covers what the document shows.

What About Sole Proprietors and Workers' Comp Exemptions?

Many appliance repair businesses are one person with a van. In some states a sole proprietor is not required to carry workers' compensation, and the certificate will show no comp line at all. That is not automatically a problem, but it is a decision you should make on purpose.

Here is a scenario. The vendor shows up with his nephew to carry a refrigerator. The nephew twists his back. The vendor has no comp policy, and the nephew is not clearly an employee, an independent contractor or a family helper. The claim looks for a deep pocket. Managers handle this with a written rule. Some require comp from everyone. Others accept a signed exclusion or independent contractor acknowledgement where the state allows it, together with a rule that no helpers enter the unit unless coverage is shown. Whatever you choose, apply it the same way to every vendor and have your attorney review it.

What Are the Minimum Practical Requirements?

Requirement Common approach for small vendors Flexibility
General liability$1M per occurrence, commonSome accept less for low-risk in-unit work
Workers' compRequired with employees or helpersDocumented exclusion for solo owners where state allows
Commercial autoAsk if the van is used for businessOften waived for in-unit-only work, check with agent
Additional insuredManagement company and ownerLess critical for one-time calls, more for recurring vendors
Description of operationsAppliance repair listed or compatibleCheck that gas and electrical hookups are not excluded

This is a starting point, not a rule. Your owners, your carrier and your state may all push the numbers up.

Should You Use Different Requirements for Different Jobs?

Many managers tier by risk. A tech who only replaces a dishwasher rack is different from one who reconnects a gas range. A simple approach: everyone provides general liability, and anything involving gas, water lines or hardwired connections requires a higher bar or a licensed trade. A plumber or electrician should handle work that crosses into their territory. See our pages on plumber insurance for rentals and electrician insurance requirements, and the handyman guide for similar scope-of-work thinking.

What If the Vendor Says He Cannot Get Insurance?

A one-person appliance repair business can usually buy a basic general liability policy. If he cannot or will not, you have options: assign him only low-risk jobs, require a certificate before gas or water work, or move the work to an insured vendor. Be consistent, because the vendor you excuse once becomes the vendor you excuse every time. Our guide on what to do when a vendor won't send a COI has wording you can use.

What Should You Check on a Small Vendor's Certificate?

  1. The named insured is the person or business that actually comes to your property.
  2. Policy dates are current, and expiration is recorded.
  3. General liability limit meets your minimum.
  4. Your company is the certificate holder. Additional insured status is requested if you require it. See certificate holder vs additional insured.
  5. Workers' comp is shown, or the exclusion is on file.

How Do You Track Many Small Vendors Without Overhead?

Small vendors are the group most likely to switch carriers or let a policy lapse, since they often pay monthly. The overhead of chasing six small vendors adds up faster than chasing one large one. Put them in the same system as your bigger vendors, tag them by property, and set up renewal reminders. See COI tracking for small property management companies.

COI File reads the ACORD 25 with AI extraction, checks it against your requirement rules, and sends renewal emails at 30, 14 and 7 days. Vendors can upload their own renewals through a magic-link portal, which suits a one-person shop with no office staff, and you can import your list by CSV. There is a 7-day free trial, no credit card required.

Frequently Asked Questions

A certificate costs the vendor nothing and shows you what coverage exists. Many property managers ask for at least general liability from every vendor who enters a unit, including one-person shops. Whether you make an exception is a risk decision to make with your agent and attorney.
Rules vary by state, and many states do not require owners or sole proprietors to carry it. The gap appears if the vendor brings a helper or is hurt on the job. Many managers accept a documented exclusion or acknowledgement where the state allows, and review it with their attorney.
Many managers ask for $1 million per occurrence, and some accept a lower limit for very low-risk, in-unit work. These are common practices, not mandates. Confirm what you can accept with your insurance agent.
Small vendors can usually buy a basic general liability policy. If a vendor refuses, you can limit the jobs you give them, require a certificate before higher-risk work, or use a vendor who is insured. Our guide on vendors who refuse a COI covers how to respond.
Do not assume so. Authorization from a brand is not the same as insurance. Ask for the certificate from the company that comes to your property, and ask your agent whether any arrangement with the manufacturer changes your requirement.
Put every vendor, however small, in one list with property tags and expiration dates. Short policies and monthly payments mean small vendors lapse more often. Software that sends renewal reminders helps once the list is longer than a spreadsheet can handle.
F

Firdaosh Bano

COI Compliance Specialist

Firdaosh Bano is a COI compliance specialist and the founder of COI File. She spent 6 years managing vendor compliance for commercial properties - tracking 2,000+ COIs across 150+ properties in spreadsheets before building the tool she wished she'd had. She writes about certificate of insurance compliance, vendor risk management, and making insurance tracking less painful for small teams.

Ready to simplify your COI tracking?

Join property managers and contractors who are ditching spreadsheets for good.

Start Base Trial →