HOA Roofing Contractor Insurance | COI File

Roofing contractor insurance requirements for HOAs: roofing exclusions, workers' comp for fall risk, completed operations and additional insured.

HOAs commonly require roofing contractors to carry general liability that does not exclude roofing, workers' compensation for fall risk, commercial auto, an umbrella, and additional insured status that includes completed operations. A $1 million per occurrence limit is common. Confirm limits and endorsements with your attorney and insurance agent.

A re-roof is usually the biggest capital project an association undertakes, and the most expensive thing to get wrong. The crew works at height over residents' homes, and the damage from a bad job tends to appear after the contractor leaves. This guide covers the coverages to ask for, the exclusions to look for and why completed operations matter more here than for almost any other trade. For the wider picture, see the HOA vendor insurance tracking hub and HOA vendor insurance requirements.

Why Is Roofing Contractor Insurance So Important for an HOA?

Three things come together on a roofing project: height, open buildings and long-tail damage. A crew with the roof deck exposed is one storm away from water inside units. A dropped bundle of shingles hits a car. A worker falls. And a flashing detail done wrong can leak two winters later, after the contractor has moved on and the final payment has cleared.

A concrete scenario: a community re-roofs in the autumn, a hidden leak shows up in March and ceiling damage appears in four units. The association hears from the owners. Whether the contractor's policy responds depends on whether it includes completed operations and whether the association is covered under it.

What Insurance Should an HOA Require From a Roofing Contractor?

These are common requirements, not mandates. Governing documents, your master policy and state rules may differ.

CoverageCommon requirementWhat to check for
Commercial general liability$1M per occurrence / $2M aggregateRoofing exclusions, height limits, hot work limits
Completed operationsIncluded on the GL policyNot excluded; ask how long coverage continues after completion
Workers' compensationStatutory limits; employer's liability $1MActive throughout the project; covers all crew and subs
Commercial auto$1M combined single limitDump trucks, trailers, hired and non-owned vehicles
Umbrella or excess$2M or more for full re-roofsSits above GL, auto and employer's liability
Additional insuredAssociation and manager namedOngoing and completed operations endorsements

What Roofing Exclusions Should an HOA Look For?

Insurers treat roofing as a high-hazard class, and a general liability policy written for a different trade may restrict roofing work. Policies may exclude roofing operations outright, limit work above a stated number of stories, exclude hot work such as torch-down membranes, or restrict coverage for work on certain roof types. These conditions vary by carrier and by endorsement.

What to check for: ask the roofer's agent to confirm in writing that the policy covers the specific roofing work in your contract, including the roof type, the height and any hot work. Ask whether there is a classification limitation endorsement. A certificate seldom shows these, so the written confirmation is what you want in the vendor file. Have the association's attorney or agent review anything unclear.

This is different from other trades in our guides. For tree work, the concern is landscaper policies that exclude it; see tree service insurance for HOAs. For roofing, the exclusion usually sits on the roofer's own policy.

Why Does Workers' Compensation Matter for Fall Risk?

Falls are the defining injury risk of roofing. Workers' compensation rates for roofing are among the highest, so some vendors try to avoid coverage by using day labor, a thin policy or a claimed exemption. If a worker falls on association property and no policy responds, the worker may look toward the association as the property owner.

Ask for a certificate showing workers' comp active for the full project, including weather delays. If the roofer says the crew are independent contractors, ask for each one's own certificate, or written proof of an exemption that your attorney accepts. Verify the policy dates and look at the named insured: the name on the certificate should match the company signing your contract.

What Is Completed Operations Coverage and Why Does It Matter Here?

Completed operations coverage responds to bodily injury or property damage that occurs after the work is finished and the contractor has left. A leaking flashing, a shingle that blows off in a storm and strikes someone, or a failed membrane damaging the interior all fall into this category.

For a roofer, most claims are completed operations claims. An ongoing-operations policy that ends the day the crew packs up is not much help. The practical step is to ask the vendor to confirm that completed operations is included and not excluded. Ask your attorney how long the contract should require the roofer to keep it in force after completion. Some contracts require evidence of coverage at specified intervals after the project ends.

Should Additional Insured Status Include Completed Operations?

In most association contracts, the association is named additional insured. The detail that gets missed is that endorsements are written differently for ongoing and completed operations. An endorsement that covers the association only while the work is under way may stop protecting it when the job ends. Ask for an endorsement that includes completed operations, and read its wording or have your agent do it.

For the basics, see what additional insured means and how HOAs handle additional insured status. For the difference between listings, read certificate holder vs. additional insured.

What About Subcontractors and Vehicles?

Large re-roofs often use sub-crews and haulers. Require each subcontractor's own certificate or written confirmation that the prime contractor's policies extend to them. Roofing trucks and dump trailers use community streets, so commercial auto matters too. A trailer load that spills onto a resident's car is an auto claim, not a general liability one.

How Do You Track Roofing Coverage Across a Project and After?

Roofing projects span weeks or months, and the contractor's policy may expire mid-project. Collect the certificate before the first day on site, calendar the expiration against the schedule and request a renewal before any gap. After the project, keep the certificate and endorsements in the file, because they are your evidence if a leak is reported later. See also the roofer COI tracking guide.

COI File reads the uploaded ACORD 25 with AI extraction and checks it against the requirement rules you configure. It sends renewal emails at 30, 14 and 7 days before expiration, and the contractor can upload through a magic-link portal without creating an account. You can tag the roofer by property and project and export PDF audit logs on the Pro plan. A 7-day free trial, no credit card required, is available on the pricing page.

If coverage lapses, see what an HOA should do when vendor insurance lapses. Before finalizing limits and endorsements, review them with the association's attorney and insurance agent.

Frequently Asked Questions

Completed operations coverage responds to claims that arise after the work is finished, such as a leak that appears months after a re-roof. For roofing it is one of the most important coverages, because most damage shows up after the crew leaves. Ask for it to be included, and ask your attorney how long to require it.
Insurers rate roofing as a high-hazard class, so a general liability policy not written for roofers may exclude roofing work, limit work above a certain height, or exclude hot work such as torch-down. Ask the vendor's agent to confirm that the policy covers the specific roofing operations in your contract.
Many associations ask for an additional insured endorsement that includes completed operations, because a standard ongoing-operations endorsement may stop responding when the job ends. Have your attorney or agent review the endorsement language and ask the roofer to supply it.
Yes. Falls from roofs are a serious injury risk, and workers' compensation rates for roofing are high, which tempts some vendors to cut corners. Ask for a certificate showing active coverage for the whole job, or written proof of a legal exemption that your attorney accepts.
Common requests are $1 million per occurrence and $2 million aggregate for general liability, statutory workers' compensation, commercial auto at $1 million, and an umbrella of $2 million or more for large re-roofs. These are typical ranges, not legal requirements. Confirm with your attorney and insurance agent.
In COI File you can tag the roofer by property and project, upload the ACORD 25 or have the roofer use the magic-link portal, and check the certificate against your requirement rules. Renewal emails go out at 30, 14 and 7 days before expiration, so a policy that ends mid-project is flagged early.
F

Firdaosh Bano

COI Compliance Specialist

Firdaosh Bano is a COI compliance specialist and the founder of COI File. She spent 6 years managing vendor compliance for commercial properties - tracking 2,000+ COIs across 150+ properties in spreadsheets before building the tool she wished she'd had. She writes about certificate of insurance compliance, vendor risk management, and making insurance tracking less painful for small teams.

Ready to simplify your COI tracking?

Join property managers and contractors who are ditching spreadsheets for good.

Start Base Trial →